STEP 3
STEP 3
Hex bolts
M10x80
Hex bolts
M8x25
Flat Washer Ø8
Flat Washer Ø10
Non Metallic Insert Hex Nut M8
Non Metallic Insert Hex Nut M10
STEP 3
STEP 3
Hex bolts M10x30
Hex bolts M8x20
Flat Washer Ø10
Flat Washer Ø8
Non Metallic Insert Hex
Nut M10
Non Metallic Insert Hex Nut M8
WORKING PROCESS
6
There are hopper and discharge port on the machine, drawing materials in hopper when it is m operation,
the materials through hopper to get into inner crusher room. Due to the blades of cutter wheel in inner
crusher room are made a relative movement in high speed and cut the materials during the movement.
After cutting, materials are discharged through the discharge port.
www.ks-power.de/en
|
6
Summary of Contents for KS 500WS
Page 13: ......
