• Check whether to install and run
as administrator
;
• Check whether the package (before decompression) is locked. You can resolve it by this method: Right-
click the package -> Click "Properties" -> Go to the "General" tab -> Click on "Unlock file" -> Click OK. Then
Unzip and Reinstall;
• Check whether the status of the network indicator is normal or replace the network cable.
Communication
Select the device that has been searched, click the
Refresh
button at the bottom right screen and you can see all
the point value of the device.
· DI1 ~ DI8:
The value 0 indicates "Open", the value 1 indicates "Short to GND". Use a wire to short the DI1 and
GND, you can see that the DI1 indicator is on;
· DO1 ~ DO2:
The value 1 is close between COM and NO and the DO indicator will be steady on, value 0 is open
between COM and NO and the DO indicator will be off. Click on the
Pen Icon
to control the point value of the
device.
As shown below:
Note:
C2000-A2-SDD8020-DD3 User Manual
6 / 33
SinoCon Co., Ltd.
www.sinoconsys.com
