You will need the following hardware and software to use the C2000-A2-SDD8020-DD3.
• C2000-A2-SDD8020-DD3 module
• A power source that provides 9 to 27 VDC, and several wires
• A PC running a Windows 7 or later versions, and an Ethernet cable
• KonNaD Settings Utility software,
for the recommended wires.
Check the following items after the device is powered on：
• The
PWR
is steady red, and the
RUN
is flashing, which indicates the device is powered normally.
• Plug the network cable into the Ethernet port of the device, and the other end of the network cable is plugged
into the computer or router. The
SPD
is steady on, the
LINK
is flashing, which indicates the device has been
properly connected to the network
for the meaning of LED indicators.
C2000-A2-SDD8020-DD3 User Manual
4 / 33
SinoCon Co., Ltd.
www.sinoconsys.com
