4
5
A
EMC COMPLIANCE
This device has been tested and found to comply with the standards for a
class B digital device, pursuant to Part 15 of FCC Rules.Those standards are
designed to provide reasonable protection against harmful interference in a
residential installation.This device generates and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
If this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, user is encouraged
to try to correct the interference by one or more of the following measures
:
--- Reorient or relocate the receiving antenna
--- Increase the separation between the device and receiver
--- Plug the device into a wall outlet different from that connected to the receiver.
--- Consult the dealer or an experienced radio/TV technician for help.
in this manual may void the warranty.
NOTE: any unshielded cable is not allowed
to be used in the device!
!
A
IMPORTANT PRECAUTIONS
WARNINGS:
1.
Before using this device, please read all the instructions in this manual
carefully.
2.
Please keep the manual carefully for future reference.
3.
Unplug this device from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp or wet cloth to clean. Please use
LCD screen detergent for cleaning if it is still dirty.
4.
Do not use the parts not recommended by the manufacturer, otherwise it
may cause a hazard.
5.
When unplugging the power cord of the monitor or adapter, please hold
the plug with your hand, do not pull the cord directly.
6.
Do not place any object on the power cord. Do not trample it either.
7.
Do not use the device near water sources, e.g. bathtub, basin, kitchen
objects.
8.
Slots and openings on the housing and its back or bottom are provided for
ventilation. To ensure reliable operation of the components and to protect
them from overheating,these openings must not be blocked or covered
placing the device on a bed, sofa, rug, or other similar surface. The device
should never be placed near or over a radiator or heater and should not be
placed in a built-in installation unless proper ventilation is provided.
9.
Make sure that the device is at least 5cm distance from the wall or other
objects around when it is in use.
10.
The power supply must respond to that stated on the rating plate. If you
have any query about the power supply, please refer to the dealer or local
power supply provider.
11.
As a safeguard measure, the monitor or adapter is equipped with a power
cord with three-terminal plug, the third terminal is grounded. If the plug
cannot be inserted into the outlet, please contact an electrical technician
for replacing the original outlet while keeping the safeguard measure in
effect.
12.
Ensure that the power socket and cord in use are able to take the sum of
the rated currency of all the products.
13.
Do not put the device at the place where user is subject to mal-operation.
