21
Button function On the Front Panel or Remote Control:
「
Select
」
:Make sure the setting.
「
Up
」「
Down
」
:Move the cursor.
「
REC
」
: Auto scan.
「
Ch1
」「
Ch2
」
: Move the dome upwards and downwards.
「
Ch3
」
: Move the dome leftwards or Reduce Value
「
Ch4
」
: Move the dome rightwards or Increase Value.
「
STOP
」
:Stop the dome running.
「
REW
」「
FWD
」
:Zoom.
「
Pause
」「
Play
」
: Focus.
Mouse function:
Left Mouse: Click the icon “
► or ◄ to adjust value.
Right Mouse: Previous.
Preset setup:
User must set preset at first. The address, protocol and baud rate of DVR is consistent with
Dome’s. You can make use of buttons to control dome and save the preset.
If user wants to call preset, user can modify the value of preset to come true.
Press
「
Select
」
button to finish the order of “call preset”.
User can perform auto scan when he saves the presets within cruise locus. Then he needs to
press
「
Select
」
button to finish the order of “auto scan”, the dome will run all along unless user
presses
「
STOP
」
button to stop it.
PTZ Mode:
Enter into PTZ mode and hold a left
mouse click button, there will be a
piece of message on the screen
(Right FIG).
Icon function:
“
▲▼►◄: Move the dome upwards
、
downwards
、
leftwards and rightwards.
“
■: Stop the dome running.
“
、
”: Focus.
“
、
”: Zoom.
“ ”: Auto scan.
“ ”: Previous.
