3
Operation:
1. Remove the USB cover to insert the Micro SD card (4). Insert the Micro SD card
conform the diagram on the housing. The video recorder does not work without a
Micro SD card.
2. Place the SEC-DVRCAM10 first in the USB connector of a PC or notebook to fully
charge the battery. After 2 hours the SEC-DVRCAM10 is ready for use.
3. Power ON the SEC-DVRCAM10 with the ON/OFF switch (2). The POWER/
FUNCTION indicator (3) flashes a few times before it lights up blue constantly. If the
indicator lights up green, it means no Micro SD card is inserted.
4. Press the RECORD/PAUSE button (1) to start recording. The POWER/FUNCTION
indicator (3) lights up green also, indicating recording is active.
5. Press the RECORD/PAUSE (1) button again to stop recording.
6. For playback of the recordings, place the SEC-DVRCAM10 with the USB connector
in a free USB port of a PC or notebook. The PC or notebook will recognize the SEC-
DVRCAM10 as a removable disk. Open the folder to view the recordings.
Remark:
If the battery is low or empty, the POWER/FUNCTION indicator (3) will flash red. The
recording will be saved before the SEC-DVRCAM10 shuts down.
Specifications:
•
Resolution:
640x480 (pixels)
•
View resolution:
352x288 (CIF)
•
Viewing angle:
58°
•
Data storage:
Micro SD card, up to 2GB
•
Video format:
3GP
e
t
u
n
i
m
/
e
t
y
B
M
2
>
:
e
z
i
s
e
li
F
•
•
Charging time:
2 hours (via USB)
y
r
e
tt
a
b
-
R
I
L
:
y
r
e
tt
a
B
•
•
Consumption:
155mA
•
Dimensions:
97x25x12mm
g
2
3
:
t
h
g
i
e
W
•
•
Operating Temperature:
0°C~50°C
Note:
for 3GP playback, download the free player: www.apple.com/quicktime/download/