SPEED DOME CAMERA
SYSTEM INFO
SYSTEM INFO
<Main Menu>
<System >
Site Info
Display Setup
Bootup Screen
Password
Set Default
System Reboot
Back
SYSTEM INFO includes following settings.
<Site Info>
Dome ID, name, broadcast address.
<Display Setup>
Screen display.
<Bootup Screen>
Display boot-up information.
<Password>
Change password.
<Set Default>
Restore factory default settings.
<Reboot System>
Reboot dome system.
SYSTEM INFO
<Main Menu>
<System >
<Site Info>
Site ID: 007
Name: 0000000000
Broadcast Add: 255
Back
<Site ID> shows the current dome’s ID. Each
dome has its unique ID. ID ranges from 001 to
254.
NOTE: <Site ID> can be set by menu only when
DIP switch is set to programmable ID.
Move the cursor to <Site ID> and then move the
joystick right to enter dome ID setting, sub-menu
as follow.
Site S/N :8888899999
Input S/N:0000000000
Move the cursor to <Input S/N> and then move
the joystick right, input the serial number
according to the <Site S/N>, and then turn the
joystick left to exit setting. Point cursor to <Back>,
and turn joystick right to exit. Finally, turn
joystick up or down to select desired ID number.
When finished, move the joystick left to save the
settings.
<Name> is the title of the dome. Assigning a name
to a dome helps user to remember which dome it
is. <Broadcast Add> is used to set
broadcast ID number. The ID functions the same
as dome’s site ID, default setting is 255. The dome
responds to commands sent to either ID. Refer to
<Changing Values> to learn how to set broadcast
address)
Select BACK to return to upper menu.
DISPLAY SETUP
<Main Menu>
<System >
<Display
Setup>
Site Name: On
Preset Title: On
Cruise Title: On
Pattern Name: On
Zoom: On
Orientation: On
Zone Name: On
Back
By switch on and off user can choose the items to
display on screen when the dome is running.
<Site Name>
Choose to display site name.
<Preset Title>
Choose to display cruise title when the dome
is cruise.
<Cruise Title>
Choose to display preset title when calling
preset.
<Pattern Name>
Choose to display pattern title when the
dome is replaying pattern sequences
<Zoom>
Choose display the current zoom times
<Orientation>
Choose to display the current lens pointing
