Konig CMP-SATAPCI11, Manual

Page: 2 / 48

2
ENGLISH
Features:
• Support 1-Ultra ATA133 Port + 2-SATA Port + 1-SATA Port external (Shared)
• PCI 32-bit 33MHz Interface, Compliant with PCI Specification Revision 2.2
• Support PCI Bus-Master Access
• Driver supported MS Windows
® 98SE/Me/2000/NT/XP, Linux
Parallel ATA Interface
• Support Ultra DMA Mode Transfer up to Mode 6 Timing
• Maximum Data Transfer Rate: 133MB/Sec
• Fully Backwards Compatible with Ultra ATA/100, Ultra ATA/66, Ultra ATA/33, EIDE/
Fast ATA-2, IDE and ATAPI Devices
• 1-Channels IDE Interface Supporting 2-IDE Devices, Co-Exist with On-Board IDE
Interface
Serial ATA & e-SATA Interface
• Support Serial ATA 1.0 Specification, Transfer Rate up to 1.5GB/s
• Support up to 2-SATA Hard Disk or 1-SATA & 1-external SATA.
Connections:
1) IDE1 = ULTRA ATA133 connection
2) CN1 = S-ATA connection 1
3) CN2 = S-ATA connection 2
4) CN3 = S-ATA connection 3
Package Includes
• SATA PCI controller card
• User manual
• SATA cable
• Software CD Driver
Important:
“CN3” SATA port and “CN2” external SATA port are shared.
This means that only one of these two connections can be used at the same time