CMP-COOLER85/86
Aluminium HDD cooler
Install the HDD
Plug the data & power cable into the connector of your HDD
Unfasten the 4 screws of top cover.
Put the thermal pads on the top & bottom side. (do not cover the HDD breath hole)
Seat the HDD on the HDD cooler as diagram.
Fasten the top cover with 4 screws.
Install into 5.25 inch drive bay
Slide the assembly set into the PC’s 5.25” bay.
Fasten the 4 screws we provided.
WARNING
:
Disconnect the product from mains and other equipment if a problem should occur. Do not
expose the product to water or moisture.
WARRANTY:
No guarantee or liability can be accepted for any changes and modifications of the product or
damage caused due to incorrect use of this product.
GENERAL:
Designs and specifications are subject to change without a notice.
ENGLISH
INSTRUCTIONS
EN
