2
ENGLISH
Active Speaker System 15” + 12”
Rear Panel Description – Top Speaker
01. Mic/line input
XLR/1/4 TRS (tip-ring sleeve) input jack
02. Mic gain
Adjust microphone level
03. EQ control high
EQ setting for high frequencies
04. Peak indicator
The peak indicator prevents the amplifier outputs from overdriving the
transducers. It lights up when the limiter is activated. It is okay for the peak
indicator to blink occasionally, but if it blinks frequently or lights up continuously,
turn down the level control.
05.Master volume
This knob adjusts all signal input or mic level.
06. EQ low control
EQ setting for low frequencies
07. Low cut/full range
switch
When the switch is turned off, the top speaker can be used as a full range
speaker.
08. Through
(full range output)
Male XLR-type connector that produces exactly the same signal that is connected
to the main input jack. Use it to daisy-chain several active systems of the same
signal source together.
09. Main input
Female XLR-type connector that accepts a balanced line-level signal from a
mixing console or other signal source.
10. Power switch
Use this switch to turn the system on and off. Make sure the signal source level
control is turned down before you turn it on.
11. Power in
This is where you connect the AC line cord to provide AC power. Plug the line cord
into an AC socket properly configured for your particular model.
12. Fuse holder
When a problem occurs in this system, the fuse will cut off the power. To replace,
use a standard fuse as specified.
13. Power out
AC power out to top system or another active system which is equipped with
powercon-3.
