König Electronic HAV-SDC20, Manual

Page: 4 / 120

3
Note: When the power adapter is connected the LCD backlight will turn on and remain lit until the AC
adapter is unplugged. When the system is running on batteries, the LCD backlight will light up briefly
each time a button is pressed and then turn off. Once power connected, display will show a while
“USB RDY” and device will auto detect the power source or computer data.
Low battery indication
There are four levels battery indication showed as following:
When the battery is almost empty, the red LED will blink to provide a final warning.
Power from USB port
The system can get power from the PC USB port for play mode if the “mass storage” icon is removed
from PC.
SD/MMC card installation
The integrated SD/MMC card slot lets you upgrade the player’s memory capacity easily with additional
SD/MMC cards.
To install an SD/MMC card:
1. Insert the card on the rear of the system in the direction of the arrow.
2. Press the card in until a click is heard.
3. To remove the SD/MMC card, press the card in and it will jump out.
Important notice: Press the card in the slot exactly conforms below figure. Trying in another way
will damage the slot.