8
To stop random playback press the
PLAY MODE
button again.
The RANDOM/
SHUFFLE
indicator will disappear from the display, and the disc will be played in
normal order again.
Programmed Playback
The Program feature allows you to program a playlist of up to 40 tracks in any desired
order. It’s possible to program a single track multiple times within a program sequence.
Programming has to be done before starting playback. If a disc is playing press the
BAND
button to stop playback.
1.
Load a disc into the CD compartment
2. Press
the
MEMORY/CLOCK
button
3. The
MEMORY
indicator and
PR01
will show in the display
4. Use
the
NEXT/PREVIOUS
buttons to select the first track of the program
5. Press
the
MEMORY/CLOCK
button again to confirm the selected track for the
first program position
6. The display will show
PR02
and the system will be awaiting your input for the
second program position
7.
Repeat steps 4-5 until the memory is full or your program is complete.
8. Press
the
PLAY/PAUSE
button to begin playback of the program. The system will
now play your complete program
9. After completing the program the device will automatically stop, the program
remains in the devices memory
10. To restart the program press the
MEMORY/CLOCK
button and then the
PLAY/
PAUSE
button
To cancel program playback press the
BAND
button in program mode.
Note:
You can use the repeat mode in combination with the program mode to
continuously repeat your program. To start repeat playback, press the
PLAY
MODE
button twice while your program is playing. The
REPEAT
indicator will
show in the display.
MP3/WMA CD Playback
1.
Press the function button and select the “CD” function.
2. Press
the
OPEN/CLOSE
button on the remote control or on the front panel to
open the CD door.
3.
Insert the CD with the label side outwards.
4. Press
the
OPEN/CLOSE
button to close the CD door.
5.
“READING”
will flash in the display while the player reads the disc. The system
reads all directories and files. Because MP3/WMA CDs contain much more
information then normal discs, reading can take a bit longer. After reading, the
display will show the total amount of directories and tracks. The MP3 and WMA
logo’s indicate the format of the files on the CD.
6. Press
the
PLAY/PAUSE
button to begin playback.
7. Playback will continue until the end of the disc is reached. To stop playback
halfway, press the
BAND
button.
