10
Programmed Playback
It is possible to program a selection of 64 tracks for playback. Individual tracks can be
programmed more than once.
1. After loading a disc, Press the PROG / CLK ADJ (6, 41) button while
in stop mode.
MEMORY and P--01 will show in the display.
2. Press the
/
/ TUNING
or
/
/ TUNING
Buttons
(20, 37, 50) repeatedly to select the desired track number.
3. Press PROG / CLK ADJ (6, 41) to confirm the first programmed
track.
P--02 will show in the display and the device will be waiting for the
next programming.
4. Repeat steps 2 and 3 to store further tracks.
5. When programming is complete, press the
PLAY/PAUSE (14, 49) button to begin
playback of the programmed tracks.
Clear Program (Resume Normal Playback)
Press the STOP (15, 35) button in the program mode, or open the CD tray (21), or change
to another mode to erase the programmed tracks.
MP3 OR WMA DISC OPERATION
Normal Playback
After loading a MP3 or WMA disc, press the
PLAY/PAUSE (14, 49)
button to start playback. The folder number, MP3 or WMA, and current
track number shows in the display.
Pause control
To pause temporarily during CD playback press the
PLAY/PAUSE
(14, 49) button the disc playback will pause and the elapsed track time
will flash in the display. Press the
PLAY/PAUSE (14, 49) button
again to resume playback.
Skip track and high-speed music search
The procedure for skipping and searching through tracks is the same as previously
described in the CD operation section of this manual.
Using the numerical buttons
You can use the numerical 0-9 buttons (52) to directly select a track to play.
Input your desired file (track) number directly and then press
PLAY/PAUSE/PRESET–
(14, 49) button, the file and track will be played, and the file and track number indicate on
the display by turns.
Skip Folder
In stop mode or during playback, press FOLDER– (54) or (44) on the remote
control to skip to next or previous folder. Playback will begin at the first track in the
selected folder.
Summary of Contents for HAV-MCS30
Page 188: ...188...
