Konig & Meyer Omega-E 18800-000-55, Operating Instructions Manual

Page: 93 / 546

Safety instructions
2
Table-style keyboard stand »Omega-E« 8
Item no.: 18800-000-55 / 18800-010-55
When operating the drive, ensure that no objects (e.g. furni-
ture, windows, cables, etc.) or body parts become jammed!
With each use, the user must verify that no other persons are
located at the table and that the movement path is free of ob-
stacles. A minimum distance of 25mm must be maintained
from adjacent objects in order to prevent pinch and strain po-
sitions!
Before you start up the keyboard table, check whether the op-
erating voltage of the system corresponds to the local power
supply. The table is in operation as soon as it is connected to
the power supply.
The anti-collision protection is not meant for pinch protection
and personal protection! For physical reasons, “soft” obstacles
are difficult or impossible to detect! In the event of a collision
with an obstacle, it is possible for the obstacle to become dam-
aged because the table is moving at nominal speed.
Only load the keyboard table to the maximum even load.
Never open the control or power adapter housing. Unauthor-
ized opening of the housing and improper repairs can result in
hazards for users and will void the warranty.
The keyboard may not be operated further in the event of mal-
functions, such as the emission of smoke or odor, unusual
sounds, or in the event of visible external damage. Pull out the
plug.
The power supply to the power outlet must be fixed close to
the table and be easily accessible.
Electric cables may not be subject to any danger of crushing,
bending or tensile stress! In addition, ensure that the cables
are long enough.
Protect electric components from moisture, dripping water, and
spraying water.
Do not run the power cable near heat sources. The cable can
be damaged by the influence of heat. There is a risk of fire or
electrical shock.
Ensure that the cables do not become kinked, jammed, or come
into contact with sharp edges. Moreover, the cables must not
become tripping hazards.
Disconnect the keyboard table from the power supply if put out
of service or not used for an extended period.
Never touch the plug with wet hands. If you wish to pull the
plug out of the power outlet, always pull directly on the plug
(note: many plugs are secured with a locking catch). Never pull
on the cable. This could damage it. Also, never transport the
device by pulling the cable.
Do not reach into the effective range of the lifting columns dur-
ing operation.
Never set the keyboard table on one side. This can damage the
lifting columns. Never let the table fall.
Safety
instructions