28130 AMP-Stand
- For Stage, Studio and Rehearsal Rooms
- Load bearing weight: up to 35 kg
- Solid and stable
- Flexible adjustment
- Space saving both when using and transporting the stand
- With a telescope tube and connection thread (3/8" and 5/8") for swivel arms
SAFETY NOTES
a. Load bearing weight: max 35 kg
b. The floor must be load bearing and even.
c. The stand legs should be placed as far apart
c.
as possible, until the leg struts are as level
c.
as possible.
d. The size of the amp must be such that the
d.
weight is centered within the leg area.
e. The back of amp is to rest on the
e.
stand tubes.
f. Tighten the screws, but ensure that the
f.
screws are not over-tightened.
g. The amp must be taken off of the stand
g.
before adjustments are made to the base-width
g.
and angle.
h. Beware, collapsing or adjusting the stand
h.
may result in the risk of pinching ones fingers.
h.
Careful and attentive handling during setup,
h.
operation, disassembly is indispensable.
SET UP INSTRUCTIONS
Setting up the 28130 Amp Stand is very easy. It comes pre-assembled and only needs to be placed in the proper position.
1
First flip open the support leg.
2
Then pull the front legs apart until...
4
Flip the support arms forward.
3
...the foot struts are as level as possible.
Thank you for choosing this product.
The instructions provide directions to all of the important set up and handling steps.
We recommend you keep these instructions for future reference.
Transportation Position
