24465 Speaker Wall Mount for JBL-Control 1
-Speaker Wall Mount to hold a JBL-Control 1
-Continuously adjustable in alignment (85°) and gradient (180°)
-Measurements: Width: 85 mm, Depth:153 mm, Height: 135 mm, Weight: 0.6 kg
Thank you very much for having chosen this product. These instructions inform you about all the important steps for
mounting and handling. We recommend to keep them for later use.
SAFETY INSTRUCTIONS
-Reserved exclusively for the JBL-Control 1.
-Suitable for indoors only.
-Please observe the local mounting instructions (which are possibly different to
-
the examples shown here).
-Cautious handling is required since the adjustment options hold dangers of
-
getting squeezed.
-Make sure that the screw joints are tight, especially when adjusting the
-
gradient of the speaker.
-Periodically check the tightness of the installation.
-Observe the mounting and handling instructions.
MOUNTING INSTRUCTION
Check if all the components are there and o.k..
1. Wall plate - 2. Support arm with end caps and inserted nuts M6 - 3. Swiveling U-bracket with thread M6x12 and
rubber coating - 4. Fixing bracket with rubber coating - 5.a,b,c,d,e fittings and key
WALL MOUNTING
Place wall plate (1) vertically and
mark the drill holes.
A
BOX FITTING
TAKING DOWN
-is done the other way round
-Please note:
-
Use a screwdriver or a similar tool
-
to take the fixing bracket off the
-
U-bracket.
Insert U-bracket (3) with hooks in
the front slot of the Control 1.
Push U-bracket (3) and fixing
bracket (4) together
until tappet locks
in the hole.
Screw U-disc and nut M6 (5.b)
together with threads.
Check if Control-1 is safely fixed to the brackets.
D
Push fixing bracket (4) over the thread and
insert it in the slot of the box.
E1
E2
E3
F
Drill the holes for the wall plugs, 4x
(ø6 for anchor bolts, ø8 for dowels).
B
Screw support arm (2) on
to the wall plate using 5.a.
C
