Mounting
To mount the wall mount, proceed as follows:
1.) Unpack and check product for damage and completeness
Technical data
Material
Mount: Steel, powder-coated black
Clamping screws: Plastic, steel zinc plated
Dimensions
(W) 100 x (D) 63 x (H) 100 mm
Packaging
(W) 165 x (D) 115 x (H) 110 mm
Weight
0.25 kg
The wall mount for microphone desk arms is pre-
assembled.
Accessories bag: 4x screws, 4x dowels
Wall mount
All four holes of the wall bracket must be
used for fastening. A suitable fastener must
be selected according to the wall condition.
Align the wall holder on the wall and mark
the four drill holes. Drill the holes according
to the selected fastener and screw the wall
holder tightly to the wall. Make sure that the
opening of the wall holder is facing up-
wards.
2.) Install wall mount.
