TESTING, MAINTENANCE, CLEANING
- Treating the stand with care will help preserve its
-
telescopic function, weight capacity and maintain
-
safety.
- Only carry out work on the stand when it is not
-
weighted and be aware of potential hazards
(pinching,
-
tipping, and jolting).
- Use a slightly damp cloth with a non-scouring
-
cleaning agent to clean the stand.
(P) PROBLEM and (C) CORRECTION
(P)
: Stand wobbles
(P)
:
(C)
: Ensure the ground is even
(P)
:
(C)
: Extend the legs to max. position and tighten
(P)
:
(C)
:
camping screw
(P)
: Telescopic section wobbles, slips down when
(P)
:
weighted
(P)
:
(C)
: Check locking pin, tighten clamping screw
WARNING!
Do not underestimate the weight of the loud speakers (max. 50 kg),
- The loud speakers must be mounted, the stand extended and straddled
-
by technicians who have the physical capacity for the procedure,
- When adjusting the stand height, hold the stand securely and always
-
lock in place with the locking pin.
TO ADJUST THE STAND WHEN WEIGHTED
Participants:
FP – first person:
moves the telescopic section with the weight
SP – second person:
operates the clamping screw and
the locking pin on the shaft collar
FP
1. holds the telescopic section securely
SP
2. loosens the clamping screw
3. loosens the locking pin by
3.
pressing the button while holding
3.
the shaft securely
FP
4. moves the telescopic section and
4.
speaker to the required height;
4.
NOTE:
4.
the locking bore holes should be easy
4.
to locate above the shaft sleeve
SP
5. releases the button so
5.
the pin can snap back
5.
intoplace in the telescopic
5.
section
FP
6. Slowly lets go of the telescopic section
6.
and the locking pin snaps into a bore hole
SP
7. Tightens the clamping screw
7.
(hand strength is sufficient)
To retract the stand and load, follow the
instructions in the reverse order.
USER INFORMATION / FUNCTIONS
WHEN MOUNTING SPEAKERS and STRADDLING STAND
Application examples (not included in the delivery)
loud
speaker
