SAFETY NOTICES
ASSEMBLY INSTRUCTIONS
- Place base rod
3
in flange bushing
1
of the subwoofer
- Close the potential gap between the bushing and the rod with the plastic ring
2
- Affix safety rail
7
by completely inserting the upper pin through the holes
8
of
-
the adjustable rod. The safety rail must run on both sides of the clamp
-
bracket
5.
- Placing clamping screws
4
through the loop of the cord
6
and screw
-
it to the clamp bracket
5
.
USER INFORMATION
Adjust the height
- Loosen the clamping screw
4
- do not remove completely
- Lift adjustable rod
9
slightly
- Select required height and slot the upper pin of the safety rail
7
in the
-
corresponding slit until it has reached the stop position. Lower the adjustable
-
rod until the safety rail must run on both sides of the clamp bracket
5
.
- Re-tighten clamping screw
4
.
Load the stand
- Check the loudspeaker connection is suitable:
-
Diameter of the adjustable rod is 35 mm and fits in the K&M products 195/8
-
Mounting Flange, 19656 Flange Bushing, etc.
- Place the loudspeaker on the adjustable rod and align
- Close the potential gap between the bushing and the rod with the plastic ring
10
TECHNICAL INFORMATION / SPECIFICATIONS
Material
tube - steel, powder coated, color black
screws, rail - steel, galvanized, nickel plated
clamp bracket: PA, black
Load
max. 35 kg (if the loudspeaker pair is suitable)
Dimensions
H: 900 - 1480 mm
Package
PE-bag
Weight
2.2 kg
Accessories
(optional)
Adapter sleeve 21326: for speaker mounting adapter
with 38 mm diameter (= US-Variant)
Thank you very much for selecting this product. These instructions provide the information on all the important assembly and handling
steps required for assembly. We recommend that you store a copy of these instructions for future use.
INSPECTION, MAINTENANCE, CLEANING
- Maintenance is always to be performed when the system is not under strain.
- Check the functioning of the ring locks regularly.
- For cleaning purposes utilize a slightly damp cloth with a non-abrasive
-
cleaning solvent.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21348-000-55 Rev.04 03-80-838-00 10/12
- The load of 35 kg only applies in conjunction with a proper installation of
-
subwoofer and satellite speakers, i.e.:
-
A. level and sustainable surface
-
B. Satellite is to be secured against sideways impact.
-
C. Weight and footprint of the subwoofer must be suitable for carrying the satellite.
- C.
Test: Installation must not tip on a slope max. 5°.
- Ensure functioning speaker material, in particular the
-
mounting adapter must be the correct size and quality.
- Pay attention to the fixed screw connections on the distance rod and flange adapter.
- Safety rail
7
must be installed.
- Unchecked loosening of the clamping screws and the safety rail is not permitted.
21348 Distance Rod
- height-adjustable steel connecting rod for satellite systems
- load up to 35 kg
- for flange bushing plug connections, pullout ø 35 mm
- height: 970-1490 mm, weight: 2.2 kg
