Fault and troubleshooting
Storage, disposal
Store the smartphone stand in a dry place.
Recycle disassembled components:
u
Scrape all components made of metal.
u
Recycle or reuse all plastic, paper, and cardboard components.
u
Sort all other components according to material composition and dispose of them
u
according to local regulations.
Kontaktinformation
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: +49 9342/8060
Fax: +49 9342/806-150
E-Mail: [email protected]
Web: www.k-m.de
19749-000-55 Rev.03 03-80-432-00 7/21
Fault/cause
Check/Remedy
Stand wobbles
●
Check the surface for unevenness.
●
Increase foot circle diameter.
Smartphone holder wobbles
●
Check the screw connections on the smartphone holder
●
and the Stand and tighten if necessary.
Smartphone wobbles in
the holder
●
Adjust or retighten the seat of the lateral stops.
Maintenance, cleaning and repair
u
Maintenance:
Regularly check that the screw connection is tight.
u
Cleaning:
Use a slightly damp cloth to clean the smartphone stand. Do not use chlorinated or
u
abrasive cleaning agents. These will cause damage to the surface and varnish.
u
Repair:
Repair any damage immediately and stop using the smartphone stand. Repair work
u
may only be carried out if you have the necessary knowledge. If any parts are missing, contact
u
the manufacturer at www.k-m.de. Here you can find a corresponding spare parts list by ente-
u
ring the article number on the type label. Use this page to reorder missing or damaged compo
u
nents.
