14761 Guitar Performer Stand
for acoustic guitars
Instructions
For set-up
loose the locking screw
2
, pull the legs
1
apart until the braces form an angle roughly as shown
in the drawing and fasten with the locking screw
2
.
For height adjustment
simply loosen the locking
screws
3
, extend the tubes
4
and
5
and retighten the
locking screws
3
at the height you want.
For securing the guitar
adjust the hexagonal screw
8
so that the opening provided by the clamps
7
is
roughly one centimeter smaller than the body of the
guitar.
Place your guitar on the stand by pulling the moveable
arm
9
outwards and postioning the body of the guitar
so that the back of the instrument rests against the
rigid arm
10
.
Then carefully let the moveable arm
9
come into
contact with the front of the guitar.
For the best playing position
you can use the wing-nut
11
and the Allen screw
12
(Allen key included) to
readjust the support arm
6
to suit your own needs.
Made in Germany
2
3
4
5
6
7
8
9
10
11
12
1
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
14761-000-55 Rev.13 03-80-741-00 9/19