Camera
Antenna
Infrared LEDs
Lens
PIR infrared sensor
Microphone
Bracket
Antenna Socket
Power Indicator
Pair Button
Link Indicator
Power Input
Receiver
Power Indicator
Power on/off
Loop Display Mode
Record/stop Video
Playback Video
Reset Button
Menu / Back
Change display layout
Switch to external display
Delete recording/Mute alarm
Up/Down for volume
Left/Right to switch camera
OK Button
Link Indicator
7”TFT-LCD
Antenna
USB Port
SD Card Slot
Bracket
AV Output Port
Power Port
Installation
1.
Insert a formatted SD card or connect an external hard disk to the display.
Note: external USB Hard Disk is not supported while on battery mode.
2.
Attach the antenna to the camera.
3.
Connect the camera using the power supply.
4.
Connect the receiver using the power supply to fully charge the battery.
5.
Switch on the receiver pressing the power button for 2 seconds.
6.
Press the menu button to access settings menu shown on the right:
English
SAS-TRANS64 Manual _Edit_0617.indd 2
9-8-2017 13:35:34