6
Turning the unit ON/OFF
Press
STANDBY
to turn the unit on or off
(standby mode)
Audio controls
•
Rotate the
VOLUME
knob on the
main unit or press
VOL +/−
on remote
control to adjust sound level. The
current volume shows in the display
temporarily before returning to the
previous display.
•
Press
EQ
repeatedly to select a
preset equalizer mode (Flat, Rock,
Pop, Classic and Jazz). The selected
EQ
mode shows at the bottom of that
display
•
Press
DBBS
to turn bass boost on or
off. When selected
DBBS
shows at
the bottom of the display
•
Press
MUTE
to cut the sound output
temporarily. When sound is cut, “Mute”
shows at the bottom of the display. To
return the sound output, press
MUTE
again or press
VOL +
or
–
.
Dimmer
Press
DIMMER
button to dim the display
press again to brighten.
Display
The dot-matrix display is a dynamic
and intuitive interface that provides the
necessary information for operation.
Some of the key displays are illustrated
below for your easy reference.
Current time and day
Timer activated
Wi-Fi signal
strength
Operation
in progress
Volume
level
Current
mode
Sleep function activated
Alarm
activated
Internet setup
Introduction
You must connect to the internet in order
to use the Internet Radio
Before you can use the Internet part of the
unit you must have a working broadband
Internet connection:
A wireless (WiFi) access point (AP)
ADSL or cable
modem
Wireless
broadband router
This unit
PC or media server
or
An Ethernet connection with an RJ45
plug.
This unit
PC or media server
ADSL or cable
modem
Broadband
router
Ethernet
Ethernet
•
If your wireless network is already in
use it might have Wired Equivalent
Privacy (WEP) or Wi-Fi Protected
Access (WPA) data encryption.
You will need to enter the WEP or
WPA key into the unit so that it can
communicate with the router.