Konica Minolta Network Setup Network Setup Manual Download | Manualshive

Page: 2 / 38

background image

i

Foreword

Welcome

Thank you for using KONICA MINOLTA PageScope Network Setup.

PageScope Network Setup is utility software which allows simple
network setup of devices such as printers. It allows setup of devices on
networks connected using TCP/IP or IPX protocol to be handled
together.

PageScope Network Setup supports the following functions.

• Displays a list of devices on the network.
• Allows a user to verify and change the network and print settings for

devices.

• Accesses the Web settings page in the device.
• Allows monitoring of the device status.
• Displays alert and output tray information for a device.

Trademark Acknowledgements

KONICA MINOLTA and KONICA MINOLTA logo are trademarks or
registered trademarks of KONICA MINOLTA HOLDINGS, INC.
PageScope is a trademark or a registered trademark of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.

Ethernet is a registered trademark of Xerox Corporation.

Microsoft, Windows, and Windows NT are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.

Novell and NetWare are registered trademarks of Novell, Inc., in the
United States and other countries.

All other product names are trademarks or registered trademarks of
their respective holders.

Copyright

©

2002 KONICA MINOLTA BUSINESS

TECHNOLOGIES, INC. All rights reserved.

The information contained in this manual is subject to change
without notice.

«
1
2
3
4
...
»

Summary of Contents for Network Setup







































Reviews:

No comments

Related manuals for Network Setup

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 2

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 28

BB-HCM381A - Network Camera

Brand: Panasonic Pages: 2

Brand: Garmin Pages: 2

Brand: National Instruments Pages: 26

Brand: National Instruments Pages: 85

Module SCXI-1503

Brand: National Instruments Pages: 79

Brand: XMOS Pages: 6

Brand: National Instruments Pages: 130

Brand: Idis Pages: 85

Brand: Unex Pages: 27

Brand: Hawking Pages: 21

TGXPS-1080-M12-MV Series

Brand: ORiNG Pages: 2

Brand: Wave wifi Pages: 3

Brand: C&H Technologies Pages: 50

GigaSpire BLAST u4hm

Brand: Calix Pages: 45

Brand: Vivotek Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands