Konica Minolta MS6000 MKII, User Manual

Page: 13 / 102

iv
Safety Information (MSP 3000 Printer)
Laser Safety
This printer is a page printer which operates by means of a laser. There is no possibility of
danger from the laser, provided the printer is operated according to the instructions provided
in this manual.
Since radiation emitted by the laser is completely confined within protective housing, the laser
beam cannot escape from the machine during any phase of user operation.
Internal Laser Radiation
Maximum Radiation Power: 8.8
×
10
-4
(W)
Wave Length: 770-810 (nm)
This is a Class IIIb Laser Diode Assy. that has an invisible laser beam. The print head unit is
NOT A FIELD SERVICE ITEM. Therefore, the print head unit should not be opened under
any circumstances.
For United States
Laser Safety
This printer is certified as a Class 1 Laser product under the U.S. Department of Health and
Human Service (DHHS) Radiation Performance Standard according to the Radiation Con-
trol for Health and Safety Act of 1968. This means that the printer does not produce hazardous
laser radiation.
CDRH Regulations
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Ad-
ministration implemented regulations for laser products on August 2, 1976. These regulations
apply to laser products manufactured from August 1. Compliance is mandatory for products
marketed in the United States. The label shown below indicates compliance with the CDRH
regulations and must be attached to laser products marketed in the United States.
All other users
WARNING: Use of controls, adjustments or performance of procedures other than those
specified in this manual may result in hazardous radiation exposure.
WARNING: Use of controls, adjustments of performance or procedures other than those
specified in this manual may result in hazardous radiation exposure.
This is a semiconductor laser. The maximum power of the laser diode is 8.8
×
10
-4
W and
the wavelength is 770-810 nm.