E-8
13.Touch “Initialization.”
14.Touch “Fax Function Parameter” and “Communi-
cation Journal Data.”
15.Touch “Yes.”
16.Touch “Yes.”
17.Touch “END.”
18.Touch “Exit” on the Service Mode screen.
19.Turn OFF and ON the Main Power Switch.
Note:
When displayed the Service Mode screen, be sure
to turn off the main power after exiting the Service
Mode screen and wait for 10 seconds or more
before turning on.
20.Perform the sending and receiving tests between
the Machine and either the store which offers the
service or the local retailer, to check that it can be
operated normally.
V. Caution when performing Dial Transfer
After setting the country code, dialing operations
may be selected after the switchboard dial tone is
detected depending on the destination. In this case,
depending on the switchboard connected to the
machine and the type of dial tone received from the
switchboard, dialing operations may not be avail-
able. If that happens, you may be able to avoid the
problem with the following setting.
<Turn the Dial Tone Detection function OFF>
1. Display the Service Mode screen.
(For details of how to display the Service Mode
screen, see the Service Manual.)
2. Touch “FAX.”
3. Touch “NetWork.”
4037IXE241DA
4037IXE242DB
4037IXE243DB
4037IXE244DB
4037IXE295DA
4037IXE241DA