E-3
9. Open the tab of the slot (Lowest position) of the
MFP control board (PWB-MFP) and push the
DIMM into the slot making sure the direction of
the DIMM.
Note:
Push the DIMM all the way into position until the
tabs on both sides of the slot fit into the cutouts in
the DIMM.
10.Reinstall the shield cover that has been removed
in step 8 (fifteen screws).
Note:
For three types of screw is used, refer the illustra-
tion to make sure the position of each screw.
11.Open the front door.
12.Remove the cover (one screw).
13.Install the shield plate to the mounting plate
(one screw furnished with the kit).
4038IXC052DC
4025U012AA
Tab
4038IXC053DA
4038IXC054DA
4038IXC055DB
4038IXC084DA