Konica Minolta magicolor 1690MF, Reference Manual

Page: 183 / 303

NETWORK SETTING Menu 5-8
TCP/IP
IP ADDR. SETTING
Purpose Enables or disables TCP/IP.
If
ENABLE
is selected, TCP/IP is enabled.
If
DISABLE
is selected, TCP/IP is disabled.
Options
DISABLE/ENABLE
Default
ENABLE
Purpose Sets the IP address of this machine on the network.
Sets the subnet mask of the network. The subnet mask
allows you to limit access to your machine (for example,
according to departmental divisions).
Sets the address of the router/gateway when a router/gate-
way is used on your network and you allow users outside
your network environment to print on your machine.
Options
AUTO/SPECIFY
Default
AUTO
(If
IP ADDR. SETTING
is set to
SPECIFY
)
IP ADDRESS: 0.0.0.0
SUBNET MASK: 255.255.255.0
GATEWAY: 0.0.0.0
Range (If
IP ADDR. SETTING
is set to
SPECIFY
)
0-255 for each xxx triplet
Use the keypad to input each number; use the
*
and
)
keys to move between triplets.
Notes A single digit number, such as “1”, cannot be input as “001”.
Align the number on the left and input “1” as “1 _ _”. Use
the
*
and
)
keys to move between triplets.
The Back key can also be used for deleting. To cancel IP
Address menu, hold down the Back key for more than one
second, and then press the Back key again after all set-
tings have been cleared.