Settings screen
The settings screen shows instrument information, error messages, etc. and enables setting of some instrument settings.
❙
❙
Opening/closing settings screen
If the settings screen is not shown, press
to open the settings screen.
When the settings screen is shown, press
to close the settings screen and cancel any incomplete settings.
❙
❙
Settings screen layout
The settings screen is divided into 4 main parts.
Selection area for selecting the item to view or set.
Value/setting area for displaying the value and changing the setting of the selected item.
Message area for showing messages related to operation of the display panel.
Key function description area describing the functions of the keys in the current operation.
❙
❙
Setting items
Serial No.
The serial number of the instrument. Not changeable.
Firmware version
The version of the FD-9 firmware. Not changeable.
MAC address
The MAC address of the FD-9’s network interface board. Not changeable.
Network name
The network name assigned to the FD-9. It can be set or changed from within the software. For details, refer to
the software instruction manual.
Display language
(See p. 26.)
English
Japanese
Chinese (Simplified)
• Change is applied immediately after
is pressed.
DHCP
(See p. 22.)
ON: The network settings are automatically assigned using DHCP
off: Use of DHCP is disabled
IP address
(See p. 20.)
IP address (xxx.xxx.xxx.xxx) set on FD-9. It can be set using the
,
, and
buttons or from
software when FD-9 is connected.
• Disabled if DHCP is set to “ON”
• Changes made using the buttons are not applied until SAVE DATA is performed.
Subnet mask
(See p. 20.)
Subnet mask (xxx.xxx.xxx.xxx) set on FD-9. It can be set using the
,
, and
buttons or from
software when FD-9 is connected.
• Disabled if DHCP is set to “ON”
• Changes made using the buttons are not applied until SAVE DATA is performed.
Default gateway
(See p. 20.)
Default gateway (xxx.xxx.xxx.xxx) set on FD-9. It can be set using the
,
, and
buttons or from
software when FD-9 is connected.
• Disabled if DHCP is set to “ON”
• Changes made using the buttons are not applied until SAVE DATA is performed.
SAVE DATA
Saves changes to network settings (DHCP, IP address, subnet mask, and default gateway), and reboots the
FD-9 to apply the new settings.
24
Summary of Contents for FD-9
Page 11: ...System Diagram 9...
Page 13: ...Preparations 11...
Page 36: ...9222 A8AN 11 2015 KONICA MINOLTA INC BFMBGA Printed in Japan...