Konica Minolta EK-604 Installation Manual Download Page 3

Page: 3 / 4

E-3

10. Connect the connector removed in step 7 to the

interface board unit.

11. Remove the connector from the wire saddle

located on the main body.

12. Connect the connector removed in step 11 to the

local interface board unit.

13. Insert the two cables connected to the local

interface board unit into the wire saddle.

14. Connect the USB unit to the local interface

board unit with the supplied USB cable. Insert
the USB cable into the wire saddle.

Note:

Route the USB cable so that it presses down the
two cables that are connected to the local inter-
face board unit.

A0YCIXC011DB

A0YCIXC012DB

A0YCIXC013DB

A0YCIXC014DB

Wire saddle

A0YCIXC015DB

Wire saddle

Summary of Contents for EK-604

Page 1: ...e screws 3 Remove the cap from the cover on the main body as shown in the illustration below No Name Shape Q ty 1 Local interface board unit 1 2 Screw 3 6 mm 1 3 Label 1 4 Installation manual 1 set Af...

Page 2: ...unit and pull the unit out Note Raise the USB unit when pulling it out 7 Disconnect the connector to remove the USB unit 8 Remove the USB cable from the local interface board unit 9 Attach the USB un...

Page 3: ...3 Insert the two cables connected to the local interface board unit into the wire saddle 14 Connect the USB unit to the local interface board unit with the supplied USB cable Insert the USB cable into...

Page 4: ...let and turn on the machine 2 Display the Service Mode screen For details of how to display the Service Mode screen see the service manual 3 System 2 Bluetooth Settings 4 Touch Effective 5 Touch END 6...