Konica Minolta EK-604 Installation Manual Download Page 2

Page: 2 / 4

E-2

4. Remove the cover from the main body as shown

below (one screw).

5. Remove the blind cover from the cover removed

in step 4 (one screw).

6. Remove the screw that holds the USB unit and

pull the unit out.

Note:

Raise the USB unit when pulling it out.

7. Disconnect the connector to remove the USB

unit.

8. Remove the USB cable from the local interface

board unit.

9. Attach the USB unit to the supplied local interface

board unit (one screw furnished with the local
interface kit).

A0YCIXC006DB

A0YCIXC007DA

A0YCIXC008DA

A0YCIXC009DA

A0YCIXC018DA

A0YCIXC010DC

Summary of Contents for EK-604

Page 1: ...e screws 3 Remove the cap from the cover on the main body as shown in the illustration below No Name Shape Q ty 1 Local interface board unit 1 2 Screw 3 6 mm 1 3 Label 1 4 Installation manual 1 set Af...

Page 2: ...unit and pull the unit out Note Raise the USB unit when pulling it out 7 Disconnect the connector to remove the USB unit 8 Remove the USB cable from the local interface board unit 9 Attach the USB un...

Page 3: ...3 Insert the two cables connected to the local interface board unit into the wire saddle 14 Connect the USB unit to the local interface board unit with the supplied USB cable Insert the USB cable into...

Page 4: ...let and turn on the machine 2 Display the Service Mode screen For details of how to display the Service Mode screen see the service manual 3 System 2 Bluetooth Settings 4 Touch Effective 5 Touch END 6...