manualshive.com logo in svg

Konica Minolta DiMAGE Z20, Instruction Manual

Share
Download
Konica Minolta DiMAGE Z20 Instruction Manual Download Page 106

106

D

ATA

-

TRANSFER MODE

CHANGING THE MEMORY CARD

Windows

®

98 and 98 Second Edition

1. Turn off the camera.
2. Remove, insert, or replace the memory card.
3. Turn on the camera to remake the USB connection.

Windows

®

Me, 2000 Professional, and XP

Mac OS

1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 104).
2. Turn off the camera.
3. Remove, insert, or replace the memory card.
4. Turn on the camera to remake the USB connection.

1. Stop the USB connection by dragging the drive icon into the trash (p. 105).
2. Turn off the camera.
3. Remove, insert, or replace the memory card.
4. Turn on the camera to remake the USB connection.

Never remove or insert a card when the access lamp is red - the data
or memory card may permanently be damaged.

DiMAGE_Z20_English_B412.qxd  04.12.27  16:57  Page 106

Summary of Contents for DiMAGE Z20





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands