Konica Minolta CM-M6 Instruction Manual Download Page 120

Page: 120 / 128

117

Message List

Error message: The operation is not correct. Follow the instructions displayed immediately.

There was an error with color measurement device. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.

There is no LED output. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.

There was an error writing to the memory. Restart and try again.
If the error occurs again, please contact the nearest service center.

A memory error has occurred. Please contact the nearest service center.

Connection to the printer failed. Please check the power and the settings.

The USB device is not working. Restart the device.
If the error occurs again, please contact the nearest service center.

The USB host is not working. Restart the device.
If the error occurs again, please contact the nearest service center.

The battery status cannot be obtained. Please contact the nearest service center.

An error has occurred with the clock IC. Please contact the nearest service center.

There was an error with the motor. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.

There was an error with the A/D conversion. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.

There was an error with the measurement angle. Restart and try measuring again.
If the error occurs again, please contact the nearest service center.

Warning: Continued use will result in incorrect operation. Follow the instructions displayed as soon as
possible.

The power supply voltage is low. Please charge.

The LED output has dropped. Replacement is recommended.

The power supply voltage is insufficient. Please charge.

Summary of Contents for CM-M6

































































































































Search results

Summary of Contents for CM-M6

Reviews:

Related manuals for CM-M6

Brands by name

Popular brands

Konica Minolta CM-M6, Instruction Manual

Search results

Summary of Contents for CM-M6

Reviews:

Related manuals for CM-M6

Brands by name

Popular brands