63
Turning the Power ON/OFF
1. Turning the Power ON/OFF
Before setting the POWER switch to ON, complete the following. When turning the power ON for the first time after
purchase, the language selection and date/time setting screens appear. Set the display language and the date/time on
these screens.
Operating Procedure
1
Connect a probe to a probe connector. (P. 21)
•
To synchronize measurement with the
display’s vertical synchronization signal
(EXT is selected as the measurement
synchronization mode)
(1) Input the vertical synchronization signal that is used for the
display. (P. 22)
•
To perform measurement simultaneously
with multiple probes
(1) Connect the necessary number of probes to the probe
connectors. (P. 21–23)
•
To communicate with a PC via RS-232C
(1) Connect the instrument to the PC using an RS-232C cable.
(P. 122)
(2) On the menu selection screen, select the RS-232C baud rate.
(P. 123)
•
To communicate with a PC via USB
(1) Connect the instrument to the PC using a USB cable. (P. 124)
•
To communicate with a PC via Ethernet
(1) Connect the instrument to the PC using a LAN cable. (P. 125)
(2) On the menu selection screen, set the IP address, subnet
mask, and default gateway. (P. 126)
2
Connect the power cord to an outlet.
(P. 61)
Turning the Power ON
Set the POWER switch to ON.
•
When turning the power ON for the first time after
purchase, the language and internal clock setting
screens appear. Set the display language and the
date/time on these screens by referring to pages
116 and 118.
Power switch
Turning the Power OFF (
)
Set the instrument’s POWER switch to OFF (
).
Power switch
Error Messages on the LCD Display: For other error messages, refer to page 134.
“Probe connection error”
•
Cause: A probe was connected or disconnected
while the POWER switch was ON.
•
Action: Set the POWER switch to OFF first,
connect necessary probes, then set the
POWER switch to ON. (Before
connecting/disconnecting a probe,
make sure that the POWER switch is set
to OFF.)
CA
-DP40
Connection
Summary of Contents for CA-410 Series
Page 12: ......
Page 40: ......
Page 139: ......
Page 140: ...En 9222 AA1J 12 2017 KONICA MINOLTA INC BIFBDA...
