Konica Minolta CA-410 Series, Instruction Manual

Page: 118 / 140

116
Setting the Internal Clock
The instrument contains an internal clock to record the measurement date and time.
Set the date and time of this internal clock.
Operating Procedure
1
While the measurement screen is
displayed, press the [MENU] key.
The setting screen is displayed on the LCD screen.
2
Press the [UP] or [DOWN] key to select
[System], and then press the [RIGHT] or
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10
min
]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
3
Press the [UP] or [DOWN] key to select
[Date/Time], and then press the [ENTER]
key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
ON[10 min ]
2017/11/05
yyyy/mm/dd
OFF
9600
ON
English
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
4
Press the [UP] or [DOWN] key to select
date and time, and then press the
[ENTER] key.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
2017/11/05
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
5
Press the [UP] or [DOWN] key to set the
desired value.
Holding down the key changes the value
continuously.
MENU
Trigger mode 0-cal AUTO
Meas Cond
User Calib
Target
Option
System
Power Save mode
Date/Time
Date Format
Bluetooth
RS-232C baud rate
DHCP
Language
Instrument Info
Initialize
Date/Time
Enter the date and time
Complete
6
Press the [RIGHT] key to move the cursor
to the next item.
Pressing the [LEFT] key moves the cursor to the
previous item.
7
Repeat steps 5 and 6 for the necessary
items.
The available range of years is from 2015 to 2099.
To cancel configuration of the setting in the middle
of the procedure, press the [ESC] key.
8
Press the [ESC] key twice.
The measurement screen is displayed on the LCD
screen.