Konica Minolta BIZHUB C353P, User Manual

Page: 424 / 516

C353P 11-9
Replacing consumables
11
11.3 Replacing an imaging unit
When it is almost time to replace an imaging unit, an advanced warning message similar to the one shown
below appears.
2
Note
When the message appears, prepare to replace the imaging unit according to your maintenance
agreement.
When the time to replace the imaging unit is reached, an advanced warning message similar to the one shown
below appears.
2
Note
If it is time to replace an imaging unit other than the black imaging unit, printing can continue in black.
Select [Continue], and then touch [Menu/Select].
!
Detail
For details on replacing the imaging unit, refer to
"To replace the imaging unit" on page 11-9
.
2
Reminder
Be sure to replace the imaging unit only after the message "IU needs to be replaced. [x]" appears. In
addition, do not replace the imaging unit of any color other than the one indicated in the message on
the message window.
11.3.1 To replace the imaging unit
1
Set the power switch to " o ".
Check that the control panel is turned off.