7
Regulation notices
About certified model name
This product is certified by the following model name:
KONICA MINOLTA branded model bizhub C3120i and C3100i.
CE Marking (Declaration of Conformity) for users
of the European Union (EU)
Hereby, Konica Minolta declares that the radio equipment models
specified above are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
"https://www.konicaminolta.eu/eu-en/support/download-centre".
Choose your product and open the section "Safety Documents".
Maximum radio-frequency power transmitted in the frequency band
(EIRP):
UKCA marking (Declaration of Conformity) for
users of the Great Britain
Hereby, Konica Minolta declare that the radio equipment models
specified above are in compliance with the essential requirements and
other relevant provisions of Radio Equipment Regulations.
The latest version of the Declaration of Conformity is available at our
official website.
Maximum radio-frequency power transmitted in the frequency band
(EIRP):
USER INSTRUCTIONS FCC PART 15 - RADIO
FREQUENCY DEVICES (for U.S.A. users)
FCC: Declaration of Conformity
Product Type Multi Function Printer
Product Name bizhub C3120i and bizhub C3100i
Options PF-P26
This device complies with Part 15 of the FCC Rules
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The design and production of this unit conform to FCC regulations,
and any changes or modifications must be registered with the FCC
and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to
penalty under FCC regulations.
• This device must be used with a shielded interface cable. The use of
non-shielded cables is likely to result in interference with radio
communications and is prohibited under FCC rules.
Do not leave toner-related parts (e.g., toner cartridge,
developing unit and Waste Toner Box) within easy reach of
children. Licking any of these parts or ingesting toner could
damage your health.
Do not store toner-related parts (e.g., toner cartridge,
developing unit and Waste Toner Box) near devices
susceptible to magnetism, such as precision equipment and
data storage devices, otherwise they may malfunction. They
could cause these products to malfunction.
Do not force open the toner-related parts (e.g., toner
cartridge, developing unit and Waste Toner Box). If toner
tumbles from the toner bottle, take utmost care to avoid
inhaling it or even getting skin contact.
If toner lands on your skin or clothing, wash thoroughly with
soap and water.
If you inhale toner, move to a place with fresh air and gargle
with a lot of water repeatedly. Should you get symptoms
such as coughing, seek medical advice.
If you get toner into your eyes, immediately rinse them with
running water for over 15 minutes. Seek medical advice if
irritation persists.
If you swallow toner, rinse out your mouth and drink a few
glasses of water. Seek medical advice if necessary.
Never touch the electrical contacts of the units (e.g., toner
cartridge and developing unit), as an electrostatic discharge
may damage the product.
Before handling, see the user documentation for the safety
information.
<If instructed to replace the fusing unit>
The fusing section is extremely hot. Before replacing the
fusing unit, be sure to open doors and covers of the
machine. Then, leave the machine to stand idle for a
specified period of time and make sure that the fusing
section has cooled down to room temperature. Failure to
follow these instructions could result in a burn.
Function
Frequency Band
Radiation. Power
Wireless LAN
(Models with Wireless
LAN function only)
2.412-2.472 GHz
Max. 20 dBm
Function
Frequency Band
Radiation. Power
Wireless LAN
(Models with Wireless
LAN function only)
2.412-2.472 GHz
Max. 20 dBm