manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 27

Introduction

x-26

C250

Printing distribution numbers or copy protection text on copies

Pages numbers or copy protection text (hidden text that prevents improper 
copying) can be printed on copies, or each copy set can be printed with dis-
tribution numbers.

For details, refer to “Printing the Date/Time, page number or distribution 
number on copies (Stamp functions)” on page 8-63.

Managing jobs

The print status of copy jobs can be checked and the jobs can be managed.

For details, refer to “Managing jobs (Job List)” on page 11-2.

Programming copy settings

Frequently used copy settings can be programmed and recalled to be used 
with other copy jobs.

For details, refer to “Registering copy programs (Mode Memory)” on 
page 4-10.

Checking the copy settings

Screens showing the current copy settings can be displayed. From these 
screens, the copy settings can also be changed.

For details, refer to “Checking the copy settings (Mode Check)” on page 4-2.

Enlarging the size of text in touch panel screens

The text and buttons in the touch panel can be displayed in a larger size that 
is easier to read, allowing basic operations to be easily performed.

For details, refer to the Enlarge Display Operations of the User’s Guide.

Displaying explanations of functions and settings

The name and function of parts and details of functions and settings appears 
in the Help screens.

For details, refer to “Displaying function descriptions (Help)” on page 4-17.

GHI

DEF

ABC

GHI

DEF

ABC

GHI

DEF

ABC

c250.book  Page 26  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands