Konica Minolta BIZHUB C250 User Manual Download Page 225

Page: 225 / 600

Additional copy operations

4-10

C250

Addit

ion

al copy op

era

tions

Chapter 4

4.4

Registering copy programs (Mode Memory)

Up to 15 copy programs can be registered.

A name of up to 16 characters can be specified for the registered copy pro-
grams.

To store a copy program

Using the touch panel buttons and control panel keys, specify the copy
settings to be registered in the copy program.

Can the current settings be checked?

To check the currently specified copy settings, press the [Mode
Check] key.

Press the [Mode Memo-
ry] key.

The Recall Copy Pro-
gram screen appears.

Touch [Program Registration].

The Program Name screen appears.

Why is [Program Registration] not available?

If 15 copy programs have been registered, delete an unnecessary
copy program. For details on deleting copy programs, refer to “To
delete a copy program” on page 4-13.

Mode Memory

c250.book Page 10 Tuesday, April 4, 2006 11:33 AM

Summary of Contents for BIZHUB C250
























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for BIZHUB C250

Reviews:

Brands by name

Popular brands

Konica Minolta BIZHUB C250, User Manual

Search results

Summary of Contents for BIZHUB C250

Reviews:

Brands by name

Popular brands