manualshive.com logo in svg

Konica Minolta BIZHUB C250, User Manual

Share
Download
Konica Minolta BIZHUB C250 User Manual Download Page 471

11

Managing jobs (Job List)

11-2

C250

M

a

na

g

ing

 jo

bs

 (

J

ob

 L

ist

)

Ch

ap

te

r 11

11

Managing jobs (Job List)

11.1

Overview of the Job List screen

Jobs

Specifying the desired copy settings, then pressing the [Start] key queues 
the copy operation in this machine. This queued operation is called a job. In 
the same way, operations for making scans and computer printouts are also 
queued as jobs.

-

Jobs that are being performed and the job log can be checked from the 
Job List screen.

-

Jobs are printed starting with the one at the top of the Current Jobs list.

-

Jobs are numbered in the order that they were programmed and are 
queued to be performed (printed).

2

Note 

The job number identifies the job; it does not indicate the printing order. 
In addition, the job number does not change until the job is deleted.

By using the “Increase Priority” function, the selected job can be moved 
to the front of the queue so that it is printed first.

Multi-Job feature

Queued jobs are managed by the machine.

-

While one job is being printed, another job can be queued. A total of 251 
jobs can be queued.

-

The number of jobs possible for each function is listed below. (The values 
listed below are for reference and may differ from the actual values de-
pending on other settings.)

–

Copy mode: 5

–

Interrupt mode: 1

–

Scan  mode:  5

–

TWAIN (Push, Pull): 1

–

Printing:  10

–

Faxes (Quick transmissions): 1

–

Faxes (Memory transmissions): 50

–

Faxes (Timer TX): 20

–

Received faxes: 100

–

Faxes (Polling RX): 1

–

Faxes (Polling TX): 1

–

Shared: 56

c250.book  Page 2  Tuesday, April 4, 2006  11:33 AM

Summary of Contents for BIZHUB C250

























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands