Konica Minolta bizhub C25, User Manual

Page: 64 / 121

Sending a Fax Manually 3-23
Sending a Fax Manually Using the On Hook Key
1
Load the document into the ADF.
d
When sending a fax manually, load the document into the ADF. An
error will occur if the document is placed on the original glass.
d
For details on loading the document into the ADF, refer to “Send-
ing a Fax Using the ADF” on page 3-2.
2
If desired, select the image quality.
d
For details, refer to “Selecting the Image Quality” on page 3-7.
3
Press the
On hook
key.
4
Specify the fax number of the recipient.
d
The keys for registered destinations can be used even if the
On
hook
key has been pressed. For details, refer to “Specifying a
Recipient” on page 3-9. (Group dial destinations cannot be speci-
fied.)
d
If Pulse is selected as the telephone line type, press the key to
temporarily change the line type to Tone.
5
Press the
Start
key to begin scanning and sending the fax.
d
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select
[YES], and then press the
Select
key.
d
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the
Start
key.
Downloaded From ManualsPrinter.com Manuals