Konica Minolta bizhub 43, Service Manual

Page: 84 / 232

- 4 - MG 3000329394 - 03
1.1.3 CCD
AND
F
LATBED WINDOWS
• Set the on/off switch to “O” (off).
• Open the flatbed scanner cover.
• Wipe the scanner windows with a lint-free cloth moistened with isopropyl alcohol, or with
antistatic paper tissues as used for cleaning optical glass.
Recommended interval : to be defined depending on utilization. After cleaning, is advised to make a
local copy to check the cleanliness of the window.
1.1.4 C
ONTROL PANEL KEYS
, LCD
PANEL AND COVERS
1.1.4.1 Cleaning the control panel keys and LCD panel
• Set the on/off switch to “O” (off).
• Clean the top of the control panel, the LCD panel and the keys with a lint-free cloth moistened
with isopropyl alcohol or by means of a spray-on cleaning product. Let the product act for a
few moments before wiping it off.
Recommended interval : to be defined depending on utilization.
1.1.4.2 Cleaning the covers
It is advisable to clean all covers during a maintenance visit.
1.2 M
AINTENANCE
1.2.1 P
ERIODICAL MAINTENANCE
It is recommended to periodically perform the change of the following parts:
1.2.2 M
AINTENANCE IN WORKSHOP
• Material must be packed correctly in the original packing.
• The carton box must be fixed on the palett (torx n°20)
1.3 S
CANNING AND COMMUNICATION ERROR CODES
The communication error codes appear in the logs and in the transmission reports.
Following error codes are decimal.
1.3.1 G
ENERAL CODES
Code 01 - Engaged or no fax tone
This code appears after 6 failed attempts (Busy or no fax answer). You will have to restart the
transmission at a later time.
Part Module Periodical maintenance Part number
Feeder roller module Scanner 50 000 pages 253032840
Feeder shoe assy Scanner 50 000 pages 253032796
Fuser assy (220V model) Printer 200 000 pages 186139224
Fuser assy (110V model) Printer 200 000 pages 186139211
Kit Roll assy Printer 200 000 pages 186138777
BTR assy Printer 200 000 pages 186139232