Konica Minolta bizhub 227, Quick Manual

Page: 88 / 186

3-14 bizhub 367/287/227
Scan-to-Send function 3 3.2
3.2.2 Sending data to your Windows computer (SMB Send)
Send scanned data to a computer on the network.
Once settings are configured, you can send data easily.
Preparation flow
The following describes a preparation flow for sending scanned data. For details, refer to the relevant page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the network cable. For details, refer to page 3-15.
2
Checking network settings of this machine (Administrator)
%
Check the network settings of this machine. For details, refer to page 3-15.
The network can be used with the default settings unless otherwise requested.
3
Checking computer information
% Check the information required for Store Address, and fill out the checklist. For details, refer to
page 3-16.
4
Configuring your computer
%
Configure settings to share a computer, or create a dedicated folder to receive files. For details, refer
to page 3-17.
5
Registering destinations
%
Register destinations to which files are sent while checking the checklist. For details, refer to
page 3-17.