Konica Minolta bizhub 227, Quick Manual

Page: 119 / 186

bizhub 367/287/227 3-45
3.3 Fax function 3
Preparation flow
The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1
Checking the cable connection (Administrator)
%
Check that this machine is correctly connected to the telephone line and network cable. For details,
refer to page 3-45.
2
Checking network settings of this machine (Administrator)
%
Check the network settings of this machine. For details, refer to page 3-46.
The network can be used with the default settings unless otherwise requested.
3
Installing the fax driver on your computer
% Install the printer driver on your computer. For details, refer to page 3-47.
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-48.
1
Creating data
%
Create data to be sent using application software.
2
Configuring the fax driver
%
Select a fax driver, and change the setting if necessary.
3
Entering a destination to send data
% Enter a destination to send data.
Checking the cable connection
1
Check that a modular cable is connected to the LINE port of
this machine.
2
Check that a LAN cable is connected to the LAN port of this
machine and the green LED is on.
TEL
LINE