Maintenance manual
KONGSBERG PROPRIETARY.
This document and its accompanying elements contain KONGSBERG
information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited if not
otherwise explicitly agreed with KONGSBERG in writing. Any authorized reproduction, in whole or in part, must
include this legend. ©2020 KONGSBERG - All rights reserved.
P a g e
32 |
7.17
Replacement of filter
Note!
Verify if normal system temperature is achieved as this is important for the oil viscosity. Too cold oil can
indicate as clogged filter.
A clogged filter will be indicated either by an alarm, or
locally by an indicator [1] on the Steering gear filter, as
illustrated.
1.
Turn the selector switch on the current motor
controller [2] to position 2 “stop”.
2.
Turn the connecting oil chocks on the expansion tank
to closed position.
3.
Place a bucket under the filter bowl.
4.
Open the nut underneath [4], if applicable, to drain oil
from the filter.
5.
Remove the filter bowl [5].