16
110-0007509/A
Read this first
Detailed information about cable specifications, termination and connectors is provided.
Unless otherwise specified, all cables are supplied by Kongsberg Maritime as a part
of the delivery.
Detailed information about relevant cable specifications, termination and connectors is
provided. Each drawing provides additional information, and may, when applicable,
include minimum specifications, connector terminations and the required number of
cores. Drawings are generally not provided for standard commercial cables. Cables
fall into three categories.
System cables
System cables are provided by Kongsberg Maritime as a part of the delivery.
Shipyard cables
Shipyard cables must be provided by the shipyard doing the installation, or the
shipowner. The cables must meet the minimum specifications provided in this
publication.
Commercial cables
Commercial cables may be provided by Kongsberg Maritime as a part of the
delivery. The cables may also be included with third party items that are used
with the echo sounder system.
All electric installations and corresponding wiring must be in accordance with the vessel's
national registry and corresponding maritime authority and/or classification society.
Note
It is very important that all cables are properly installed and correctly terminated.
Observe the relevant regulations and work standards. Always leave enough cable slack
close to system units and cabinets to allow for maintenance.
Only skilled and authorized personnel can install the echo sounder cables.
Kongsberg Maritime accepts no responsibility for damage to the system, or reduced
operational performance, when this is caused by improper wiring.
Before you install or maintain the system cables, make sure that the AC mains circuit
breaker for the system is disconnected.
Related topics
Cable layout and interconnections, page 15
Simrad Echo sounder system Installation Manual
Summary of Contents for Simrad NISE 3900E
Page 49: ......
Page 50: ... 2022 Kongsberg Maritime ...
