INSTALLATION MANUAL
20221594 / B
11
If only a constant small error should occur, loosen the fixing
screws for the synchro transmitter and adjust by moving the
synchro transmitter for correct heading output from the GI51.
2.8
S9 Steering lever
The S9 Steering Lever can be added to an autopilot system to
provide remote non-follow up steering capability. The S9 is
designed to be mounted in weather exposed locations. If it is
installed in such location, it is recommended to insure that the
cable entry glands are properly tightened. In addition silicone
sealant should be added around cable to ensure water protection.
As the mode selection by the Enable signal is based on a pulse,
it is recommended that only one S9 lever is used. This because
the mode selection switch is fixed levels, not pulsed. If several
NFU levers are required, the S35 lever is recommended.
Busse-Yachtshop.de [email protected]
