Kongsberg Simrad FX80, Quick Start Manual

Page: 10 / 46

8
977-00017021/1.0
Important
The FX80 is an advanced product. As with most other advanced instruments, there is
important information that you need to know.
When the FX80 is not used
When you are not fishing, and the FX80 units are on board, switch off the entire system.
If something breaks down
If you believe that something has broken down, contact your local dealer. A list of all
our dealers is provided on our website.
• https://www.simrad.com
If you are unable to contact a dealer, observe the support information in this publication.
When you want to turn off the FX80
You must NEVER turn off the FX80 by means of the on/off switch on the Processor
Unit. You must always exit the FX80 application by clicking the
Exit
icon on the top bar.
Note
If you turn off the FX80 by means of the on/off switch on the Processor Unit you may
damage the software and the interface settings used to communicate with external
devices.
Rules for Sonar Head handling
A Sonar Head must always be handled as a delicate instrument. Incorrect actions may
damage the Sonar Head beyond repair. Observe these Sonar Head handling rules:
• Do not activate the Sonar Head when it is out of the water.
• Do not handle the Sonar Head roughly and avoid impacts.
•
Do not
expose the Sonar Head to direct sunlight or excessive heat.
• Do not use high-pressure water, sandblasting, metal tools or strong solvents to clean
the Sonar Head face.
•
Do not
damage the outer protective skin of the Sonar Head face.
• Do not lift the Sonar Head by the cable.
• Do not step on the Sonar Head cable.
•
Do not
damage the Sonar Head cable, and avoid exposure to sharp objects.
Simrad FX80 Quick Start Guide