Kongsberg Maritime AS
PUBLIC
KONGSBERG PROPRIETARY – see Statement of Proprietary Information
401925 / D / 2021-08-17 / Page 4 of 15
1
INTRODUCTION
The purpose of this Harbour Acceptance Test (HAT) is to verify that the Echosounders and/or
the ADCPs in the EK80 system are correctly installed, and fully functional. It is then ready for the
Sea Acceptance Test (SAT).
After the HAT, the Customer Acceptance Form must be signed by the relevant parties. The
completed document then becomes the official report. Data logged during the HAT must be
downloaded and stored on KM internal servers for future reference.
1.1
Personnel and location
This Harbour Acceptance Test is done onboard the vessel, alongside the quay. The test is done
by personnel from Kongsberg Maritime, or by a representative from an authorized dealer or
distributor.
The personnel performing the HAT must be qualified operators of the system and have received
proper training.
1.2
Test equipment
The following test equipment is required to perform this test:
•
453635 – Shielded dummy load WBT
