Kongsberg Simrad CS90, Reference Manual

Page: 156 / 686

154
442700/A
Setting up the presentation of the depth lines in the map
Once a map service has been chosen, use
Map Display
to choose which map elements to
include in the map presentation. The
Safety Depth
page allows you to change the safety
depth settings, and thus the presentation of the various water depths.
Context
The map is only shown in Horizontal views when
Range Projection
is set to True .
Once a map is projected on top of the echo data, the depth contour lines are drawn with
specific colours.
Procedure
1 Open the
Display
menu.
2 Select
Display Options
to open the dialog box.
3 Select
Safety Depth
to open the page.
4 Select the settings you want to use.
Note
These map settings are only valid for WMS (Web Map Service) maps from a
KONGSBERG navigation system.
5 Select
OK
to save the selected settings and close the dialog box.
Related topics
Operating procedures, page 79
Using maps, page 152
Safety Depth page, page 530
Choosing a map provider
If you want to add a map to the display presentation you must first select a map provider .
Context
The map is only shown in Horizontal views when
Range Projection
is set to True .
Procedure
1 Open the
Setup
menu.
2 On the
Setup
menu, select
Installation
.
3 Select
Map Setup
to open the page.
Simrad CS90 Reference Manual